Holland Bar Stools – If you plan to make a bar stool, you should take into account the height and width of the bar and the materials you will use. The bar bars are made of different dimensions, so it is important to take the correct measurements. The bar stools offer a larger area for people to share while chatting, drinking and eating in your bar. Measure the height and width of the bar, using a tape measure.
For example, the width of the bar can be 5 feet (1.5 m) and the height of 4 feet (1.2 m). Cut six 2 by 4 length wooden boards 3 feet (91 cm) using a table saw. Cut two 2 by 4 boards 2 feet (60 cm) long. These will be the leg connectors. Cut eight 2 by 4 boards 5 feet long (1.5 m) using a table saw. Two of these pieces will be the long parts of the frame of the holland bar stools.
Six of the pieces will be the holland bar stools tables. Cut two 2 by 4 16-inch (40.5 cm) long boards using a table saw. These parts will be the short parts of the seat frame. Smooth with sandpaper all the cut edges of the wooden boards to remove the chips. Cut six 1/4 inch (0.6 cm) rubber sheets, 2 by 4, using a cutter. Wear gloves, goggles and a protective mask when working with a saw and a drill.holland bar stools planning make guide