Led Strip Lights – Custom cars sometimes include custom decoration lighting as a option touch to highlight the grille lines or headlights or lighting the foot areas inside the other. Flat LED strips to fit easily into spaces between the adjustment panels and are easily adapted for various lighting solutions. You can cut flat strips of LED lighting to the desired length for any project and connect them to the existing wiring of the vehicle.
By connecting the led strip lights wiring for various automatic lighting circuits, you can control when the lights come on. Cut strip lights to the desired LED length by cutting between groups of lights, according to the manufacturer’s recommendations. Expose and pull the ends of the wires that lead to the LED lights. Identify the wiring circuit you will use to operate the lights the circuit you use will determine when the lights are on. For example, it is possible to install LED lights that flash with the turn signal. Use the voltage tester to identify the correct cable.
For example, disconnect the wiring by the signal, in turn, activate the signal, and probe the wiring harness to identify the cable that conducts the current. Identify the fuse in the wiring circuit you are going to take advantage of, and remove the fuse. Tap the wiring light, using a pinch-type splitter to connect a length of led wire to connect to the led strip lights simply insert the ends of the light wire into the splitter and pinch closed.